F 61 - Stainless Steel Forged Fittings

Raw Material ASTM A182 F61 Ed. 2020
C % 0.040 Max.
Mn % 1.500 Max.
P % 0.040 Max.
S % 0.030 Max.
Si % 1.000 Max.
Cr % 24.000-27.000
Mo % 2.900-3.900
Ni % 4.500-6.500
Cu % 1.500-2.500
N % 0.100-0.250
Stainless Steel F61 Fitting Manufacturers & Suppliers

F61 Stainless Steel Forged Fittings Manufacturers, Exporters & Suppliers in India


You can find a variety of Stainless Steel F61 fittings for your next project. Flanges are one of the most common types of stainless steel fittings. Typically, F61 flanges contain 25% chromium, 6% nickel, 2.5% molybdenum, and 3.3% carbon. These materials are extremely durable and can handle a variety of applications. In addition, they have a smooth surface, which makes them ideal for use in a variety of industries.


Stainless Steel F55 equates to UNS S32760. It is duplex stainless steel, which means it contains at least 25% chromium. Platt & Mather, Manchester, UK, developed this material. It is a super duplex stainless steel with increased corrosion resistance and machinability. Sandvik stocks SAF32760 solid bars in sizes from 1/2" to 16" in diameter.


Unlike conventional stainless steel, the alloy F255 is highly alloyed and corrosive resistant. Its high corrosion resistance makes it a good choice for use in industries like the pulp & paper industry, the textile industry, and the aviation and power engineering fields. 


The material is also used in a wide range of applications. This material is also used in the chemical industry because of its resistance to acids. And with its versatility, it can be used in a variety of applications that would otherwise be impossible or infeasible for other metals.


Duplex Steel F61 round bar is made to meet ASTM A182 F61 specifications. It is also available as UNS S32550 round bar, FERRALIUM 255 BAR DISTRIBUTOR, F61 A182 hex bar, and UNS S32550 square bar. A stainless steel F61 bar is a great option for use in a variety of industries. You can find these steel bars in a wide range of sizes and shapes and can find the corresponding F61 bar at your local hardware store.


In most cases, LF3 flow switch is installed in a tee with a standard 1-inch pipe size. If your pipe diameter is larger than this, you should use a reducing tee instead. In addition, the reducing tee helps you to get a desired paddle length in the flow stream. The F61 flow switch is typically installed five pipe diameters away from an elbow, valve, or other pipe restriction.