LF3 - Carbon Steel Forged Fittings

Raw Material ASTM A 350 LF3 Cl.1,2,5 Ed.2018
C % 0.200 Max.
Mn % 1.900 Max.
P % 0.035 Max.
S % 0.040 Max.
Si % 0.20-0.35
Cr % 0.300 Max.
Mo % 0.120 Max.
Ni % 3.30-3.70
Cu % 0.400 Max.
V % 0.030 Max.
Cb % 0.020 Max.
Carbon Steel LF3 Forged Fitting Manufacturers & Exporters

LF3 - Carbon Steel Forged Fitting Manufacturers, Exporters & Suppliers in India

 

Carbon Steel LF3 Forged Fitting is widely used in pressure plates and pipelines. These fittings are made from carbon steel and have a weld neck. There are numerous advantages of these forged fittings. 

 

Low-Temperature Threaded Coupling - This type of forged fitting is the most common type of carbon steel pipe fitting. It comes in a variety of grades and standards. The forged fitting is a high-strength, high-quality pipe fitting that reduces the risk of leaks. Forged fittings are available in a variety of shapes, including threaded and socket weld types.

 

Carbon Steel LF3 Forged Flange - LF3 forged flanges are made of carbon steel and meet the ASTM standards for low-temperature settings. The forged fittings are designed to accommodate temperatures as low as -20 deg. Brass CA 360, 345, and 377 are available. LF3 Flanges are available in pressure ratings from class 150 to 2500. 

 

These fittings are made by highly skilled professionals using the latest methods. Each of these forged flanges undergoes rigorous testing to ensure its quality. They are widely used in industries such as chemical, petroleum, and mechanical. High-quality carbon steel flanges are designed to withstand pressure. 

 

Carbon steel flanges have higher yield rates than most other materials, so the requirements for their properties are very stringent. The added carbon content makes steel heavier and less ductile. Additionally, lack of heat treatment reduces carbon weldability. These considerations make a forged flange a superior option.

 

SA350 LF3 Forged Fitting - These fittings are made from high-quality carbon steel and meet all ASTM standards for carbon steel. These fittings are available in nominal bore sizes of 1/8" to 36" and are available in socket weld, screwed, and threaded varieties. Carbon Steel F42 Forged Fittings are also available in other materials, which can be used for various purposes.

 

Flanges - Typically made from carbon steel, forged fittings are used for high-pressure systems. They can be used for piping systems at higher temperatures, as well as for ambient service conditions. They can be used in petrochemical plants, heat exchangers, and hydro-carbon processes. They are also used in marine engineering and oil and gas equipment. They are also commonly used on outlets and inlets.

 

Quality pipelines - A forged flange must meet strict specifications to meet pipeline performance standards. Its carbon content is typically less than 2%. Pipeline steels should also have a good weldability rate. Most forged fittings are manufactured to these strict standards. This means that they will be stronger than any other pipeline or pipe fitting. But the welding process is critical for pipeline performance.

 

ASTM A350 - This specification covers a wide range of carbon/low-alloy steel flanges and pipe connections. It requires notch toughness testing. A grade B16.5 flange will withstand 150 degrees Fahrenheit. A B16.5 flange will withstand about 2.4 times its Flange class. If you are looking for a high-quality forged flange, Red Earth Steels Pvt Ltd is a good choice. The company manufactures and supplies ASTM A350 LF3 Forged Fitting.

 

Back