Redu Tee

Redu Tee Buttweld Pipe Fittings Pipe Manufacturers, Exporters & Suppliers in India


You can use a variety of pipe fittings for reducing and connecting piping systems. Reducing tees are used in situations where the main run diameter is less than the branch diameter. These tees are often described as NPS sizes, and their diameters are smaller than the branch diameter. However, reducing tees are not always economical, and may require branch connections or branch fittings.


Buttweld Reducing Tees and short radius 45 degree elbow are available in threaded and unthreaded end connections. They're designed to handle a wide range of temperatures and pressures and are often used in construction activities. Another feature of these tees is their ability to allow directional changes in pipe flow. A buttweld tee allows you to branch off from a larger pipe to a smaller one.


Redu tee buttweld pipes can be made from a variety of materials, including carbon steel, stainless steel, nickel alloy, and high-yield carbon steel. Generally, buttweld pipes are made from a seamless pipe, though they can be welded if you need a large-diameter pipe. If you want a tee buttweld fitting, you'll need to choose from a manufacturer that makes it in stainless steel.


When choosing buttweld pipe fittings, you should consider the pipe size as well as the schedule. The pipe ID must match the ID of the buttweld fitting. Otherwise, the buttweld fitting assumes a standard wall. Pipe fittings larger than 12" must be specified as SCH 40 or True Schedule 40, as the standard wall does not correspond to the pipe schedule.


Buttweld pipe fittings come in two main configurations: welded and seamless. Seamless buttweld pipe fittings are made from seamless pipe and are more expensive than welded ones. Seamless pipe fittings are often only available in smaller sizes, but welded ones are generally much cheaper. Regardless of which type you choose, there are a few advantages to buttweld pipe fittings.


Buttweld tees can be used to close the ends of pipes, and also to seal the drip legs of tanks and heating coils. They are commonly used in systems with a small diameter, and can be a cost-effective way to connect two pipes. They are available in a range of sizes and can be used to blind a pipeline or connect two pipes with the same diameter.