S 32760 - Stainless Steel Hot Induction Bends

Raw Material ASTM A 815 Gr. WPS32760 Ed. 2020
C % 0.030 Max.
Mn % 1.000 Max.
P % 0.030 Max.
S % 0.010 Max.
Si % 1.000 Max.
Cr % 24.00-26.00
Mo % 3.00-4.00
Ni % 6.00-8.00
Cu % 0.50-1.00
N % 0.20-0.30
W % 0.50-0.10
S 32760 Hot Induction Bends Manufacturers & Suppliers

S 32760 Stainless Hot Induction Bends Manufacturers, Exporters & Suppliers in India


The S32760 Hot Induction Bend is a specialized metal bending process, which produces high-quality shaped components. It is ideal for metal products and components that require high-temperature forming and tight tolerances. 


These bends are fully CE marked and conform to the strictest standards of material compliance and end-use. The process involves heat input, stress, and ovality, causing several changes in the materials' mechanical properties.


The company's technical department uses computerized systems to design and manufacture these hot induction bends. They are produced using recognized rules and calculations. 


Hot induction bends are available in forged tees, elbows, and radii. Sizes range from 1/2" NB to 24" NB. These bending products are suitable for most industrial applications. They are also widely used in marine applications.


Super Duplex Steel WPHY 42 Hot Induction Bends are manufactured to meet ASTM A815 pipe bending standards. These bends are available in a variety of styles, including the DIN 1.4410 long radius and super duplex pipe elbow. They can be used for bending large or small pipes. 


Moreover, they are corrosion-resistant and resistant to erosion. S32760 Hot Induction Bends are a versatile and highly-efficient option for bending Super Duplex steel pipes.


The company exports these products to countries like Kuwait, Oman, and the UAE. They are made using high-quality super duplex steel. So, you can rest assured of their quality and consistency. All you have to do is contact us for more details.

S32760 Hot Induction Bends is a popular choice amongst manufacturers. 


The high quality, precision, and flexibility of this metal bending method make it a highly efficient method that overcomes the limitations of cold bending. The process begins with a straight pipe or tube placed on a machine bed. 


The material is heated to 800 degrees Fahrenheit by hydraulic pressure. It then passes through an induction coil at a constant rate and temperature, forming the section into the desired shape.


The S 32760 Hot Induction Bend is one of the most widely used pipe bending processes because it is accurate, fast, and produces few errors. Its nominal diameter is used to determine the radius of the bend, and the material used includes carbon steel, low alloy, and A106.