ASTM A325 - Stainless Steel Fastners

Raw Material ASTM A 325 Type 1 Ed.2014
C % 0.28-0.55
Mn % 0.57 Max.
P % 0.048 Max.
S % 0.058 Max.
Si % 0.13-0.32
Stainless Steel ASTM A325 Fasteners Manufacturers & Exporters

Stainless Steel ASTM A325 Fasteners Manufacturers, Exporters & Suppliers in India

 

Stainless Steel ASTM A325 fasteners are high strength bolts that are designed for structural connections. They are generally short in length, have a heavy hex head, and are often specified by engineers for anchoring purposes. 

 

These bolts are available in a wide range of sizes and are made from medium carbon steel that is alloyed to develop the desired mechanical properties. They may also be designated T or M to indicate their type and intended use.

 

Stainless steel fasteners comply with ASTM A325 Type 1 standards for structural steel joints. They are measured from under the head to the center of the bolt and have a tensile strength of 120,000 PSI for 1/2 to one-inch diameter fasteners. 

 

Typically, these fasteners are ultra-coated for increased corrosion resistance compared to hot-dipped galvanized fasteners. Ultra-coating, which is applied to stainless steel fasteners, results in higher corrosion resistance than hot-dip galvanized fasteners. The coating is applied to the threads without impacting their function.

 

Stainless Steel is used in applications that need a high level of corrosion resistance. This material is also soft and malleable, making it suitable for use in corrosive environments. 

 

Choosing the right 4.6 fasteners for your application requires a vendor with a broad knowledge of the material and its application. Low-cost countries may have more vendors, but these can sometimes be a source of counterfeit materials. 

 

Choosing the right vendor is as important as choosing the right materials. Choose a vendor with a proven track record of high-quality materials and responsiveness. That way, you can be assured of getting the best fasteners possible for your project.

 

Stainless steel ASTM A325 Fasteners are used for applications that require corrosion-resistant fasteners. They can be used in a wide variety of industries and applications, including shipbuilding and marine construction. Regardless of their intended use, you'll find fasteners that are made from stainless steel. 

 

These fasteners can be used on any type of ship, from boats and cars to airplanes.

 

Back