347 - Stainless Steel Hot Induction Bends

Raw Material ASTM A 403 Gr. WP347 Ed. 2020
C % 0.080 Max.
Mn % 2.000 Max.
P % 0.045 Max.
S % 0.030 Max.
Si % 1.000 Max.
Cr % 17.00-19.00
Ni % 09.00-12.00
347 Hot Induction Bends Manufacturers & Suppliers

347 Stainless Hot Induction Bends Manufacturers, Exporters & Suppliers in India


If you're looking for high-quality piping fittings, you might want to check out 347 Hot Induction Bends. These products can be made from carbon or duplex steel. Listed below are a few of the types of hot induction bends. 


These fittings are made to the same standards as ASME SA182 Stainless Steel 347 and 347H pipes. They meet stringent technical requirements and are widely accepted in the industry.


Whether you're looking for a 5d or a 180 degree Hot Induction Pipe Bend, you've come to the right place. We're a Mumbai-based company that stocks and exports a variety of hot induction bends. We also offer Stainless Steel Hot Induction Bends, Buttweld Bends, API 5L induction bends, ISO 15590-1 induction bends, and several other sizes.


Wrought Austenitic Stainless Steel 347H Mitered Pipe Bends is an example. These bends feature a welded design and are suitable for ASME SA403M pipe bends. In addition to this, we also carry a wide range of stainless steel 347H mitered pipe bends. If you're looking for a more precise 347H pipe bend, we also carry UNS NO S 31803 High-Pressure Pipe Bends.


Hot Induction Bends are a safe and environmentally friendly pipe bending process. They are fast and have minimal errors. The nominal diameter of the bend is set by the radius of the hot induction. 


Material for hot induction bending can include carbon steel, low alloy, and bi-metal alloys. In addition to this, the process is also quick and convenient. And the material is inexpensive compared to standard elements.


An Induction Bender can be used to bend a structural steel beam or pipe. Its heat-induced coil is placed around the pipe to be bent. Because the coil is pre-fabricated, the process is very clean. No lubrication is required, and water used for cooling is recycled. 


The result is a product with outstanding physical properties. This process also reduces the thickness of the bend radius. So if you're looking for a high-quality structural steel beam, you've come to the right place.